Monday, January 24, 2011

Enzo's Garage Featuring Sal's Sonoma Valley Raceway, California

Enzo's Garage Storefront at Amazon.com

Sal's Sonoma Valley Raceway, Sonoma, California

Evolution of a 57 foot track
  
Mario's Slot.It Ferrari 312 PB










This is our Friday night track, thanks to Sal's donation of space.  Built from 3 1/2 sheets of 4X8 ply on 2X6 X10 rails underneath supported by saw horses, Scalextric track and Scalextrics lap counters, and guard rails.  Sal built the skid pads from foamcore which gave an extra area for the car's tails to slide out.  Sal also came up with the best system of protection for the valuable model racers.  

Normally at any tracks curves from a fast straight, (and The Sonoma Valley Raceway, straigtaway is FAST), your car is off the track if you're unable to maintain discipline, ego and testosterone.  

Your cars are off to concrete destruction, no longer destined to the Royalty of the Shelf Queen.  Fuggetaboutit!  Al's clean system was to hang sheets from the ceiling hugging the curves total area radius and it acts like a gentle net that catches errant and off guard wannabe Zen masters who get distracted in a race.   

Sal's ingenious model car racer saviour device - '2 sheets to the wind'
  The track is about 57 feet with a challenging 'S' track that tears cars up if not set up right.  The straight track is about 23 feet long and is a satisfying experience gunning the gas.  The track record is 3.5 seconds held by Mario's Slot.It Ferrari 312PB in the photo above.

Scale Miles Per Hour, SMPH = over 300mph!
Lola T70's barreling down Riverside Raceway





Enzo's Garage at Amazon.com

Saturday, January 1, 2011

Revell 1967 Mustang # 36 with Swing Arms For Braids and Guide / SOLD!

Introduction: The date was April 17, 1964. Intermediate sized muscle cars, with big block engines were gradually replacing the fullsized muscle car. Lee Iacocca, Ford's General Manager, had always invisioned a small sports car to be the next hot item in the street wars. Ford decided that instead of improving their lackluster intermediate, they would do the competition one better and introduce a whole new breed of automobile, the pony car. Originally designed as a two seater in the European tradition, Iacocca realized that true success depended on volume sales. Therefore the Ford Mustang was introduced as a 1965 model that was based on the compact Falcon to lower production costs. It came with an obligatory back seat and a multitude of options that would give the buyer an opportunity to customize their purchase, and generate extra profits for Ford. Plymouth faithful stress that their Baracuda beat the Ford Mustang to market by two weeks. But it was the Mustang, which racked up over 22,000 sales its first day and one million sales in its first two years, that turned the market and people's attention to the pony car. The pony car class that the Ford Mustang helped create is the only class of muscle car that still exists today.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

 In the early 1950s none of the three large American manufacturers had a sportscar in their line-up. This segment was dominated by the British Jaguars and MGs. In 1953 General Motors made a bold move with the introduction of the Corvette, which can be considered America's first sportscar. Ford kept a close eye on the sales figures of the two-seater Chevrolet and launched their answer, the Thunderbird, in 1955. Although the two were similar, the Ford T-Bird was more luxurious.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

 After three years, the two-seater Thunderbird was no more and replaced by a four-seater version. Chevrolet continued the production of the Corvette, which was gradually growing out to be a big hit. It was another Chevrolet's sales success that would spark the development of a second two-seater Ford. Launched in 1962, the Chevrolet Corvair Monza proved that there was a big market for affordable sports cars in North America.


 
 In 1960 Lee Iacocca was appointed Ford Division General Manager at age 35. He set out to give Ford a more sportive image, starting with re-entering NASCAR, and creating the Futura Sprint by adding a V8 to the Falcon line-up. This big project was a relatively affordable sports-car, at nearly half the price of the Corvette. The first exposure of this new two-seater came in the form of the Mustang I concept first shown at the 1962 US Grand Prix.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

Equipped with a mid-mounted V4 engine and all-round independent suspension, the Mustang I was a revolutionary vehicle for Ford, however it proved to be too much of an exotic to fit Iacocca's new product vision. In 1963 the Mustang II concept was introduced, again at the US Grand Prix. To maintain a manageable price, many Falcon parts and a more conventional front engine, live axle were incorporated. 
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
  
 On April 17, 1964, the production version of the Mustang was introduced. Many of the Mustang II concept's styling cues found their way on the production car, most notably the triple row rear taillights. A six cylinder and two eight cylinder engines were available at the launch, which could be combined with various equipment packages. Coupe, convertible and 2+2 fastback were the three available body-types.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
  
 A fully 'specced' Mustang retailed at less than $3,000, compared to over $4,000 for a Corvette. The Mustang proved to be an immediate hit, selling over 500,000 examples in the first year. In the following years various revisions were made to the engines, options and body styles, but it wasn't until 1974 when a second Mustang series was introduced. Today the first series Mustang is considered an icon and one of America's most treasured classics.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
  
Californian racing-legend Carroll Shelby had already had incredible success with Ford's V8 engines in his Cobras when he offered the company to modify their Mustang to beat the then unbeatable Corvettes. Ford happily accepted and the result was the Shelby Mustang GT350, which used the same engine as found in the Cobra 289. Livered in the American racing colours of white with two blue stripes, they were raced with a lot of success in both American and European events.

For 1967 the Mustang bodystyle was altered and Shelby added a new model to his line-up; the GT500. It featured a 428 cid engine, pumping out well over 350 bhp. Where the early Shelby Mustangs were very competition oriented, the 1967 and 1968 cars were more of a combination between performance and luxury. At the end of 1968 a more powerful GT500 KR (King of the Road) was launched, which featured the 428 Cobra Jet engine. Production of the Shelby Mustangs ceased at the end of 1969, when Ford's own high performance had mostly taken over.






Vintage Revell 1967 Camaro #74 NASCAR - SOLD!

I purchased this rare vintage Revell Camaro recently, which I believe came from a Revell racing set that came with a 1967 or '68 Mustang Fastback.  This car features a swing-arm for the guide blade and braids assembly.  Beautiful color and paint finish on the Camaro for a car over 45 years old, no?  I have before pictures of the partial cosmetic restoration done on this car.  (I used cotton swabs, and microfibre cleaning cloth soaked in de-ionized water, followed with lemon oil from a pressurized can, to give it's final lustre).  The body is complete, runs nicely, but exhibits fine scratches from use and wear, however the window posts are intact.  The striping is worn and I debated restoring them.  If you have a current collection of NASCARs, I believe this would make a fine addition, and round out anyone's collection.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

 1967 Camaro SS
The debut Camaro shared some mechanicals with the 1968 Chevy II Nova. Almost 80 factory and 40 dealer options, including three main packages, were available.
 The RS was an appearance package that included hidden headlights, revised taillights, RS badging wings, and exterior rocker trim.
The SS included a 350 cu in (5.7 L) V8 engine and the L35 and L78 396 cu in (6.5 L) big-block V8's were also available. The SS featured non-functional air inlets on the hood, special striping and SS badging on the grille, front fenders, gas cap, and horn button. It was possible to order both the SS and RS to receive a Camaro RS/SS. In 1967, a Camaro RS/SS convertible with a 396 engine paced the Indianapolis 500.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
   The Z/28 option code was introduced in December 1966 for the 1967 model year. It was the brainchild of Vince Piggins, who conceived offering "virtually race-ready" Camaros for sale from any Chevrolet dealer.[1] This option package was not mentioned in any sales literature, so it was unknown to most buyers.[2] The Z/28 option required power front disc brakes and a Muncie 4-speed manual transmission. 
 
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
    It featured a 302 cu in (4.9 L) small-block V-8 engine, 3" crankshaft with 4" bore, an aluminum intake manifold, and a 4-barrel vacuum secondary Holley carburetor of 780 cfm. The engine was designed specifically to race in the Trans Am series (which required engines smaller than 305 cu in (5 L) and public availability of the car. Advertised power of this engine was listed at 290 hp (216 kW). This is an under-rated figure.[2] Chevrolet wanted to keep the horsepower rating at less than 1 hp per cubic inch, for various reasons (e.g. insurance and racing classes).    


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
    The factory rating of 290 hp occurred at 5300 rpm, while actual peak for the high-revving 302 was closer to 360 hp (268 kW) (with the single four barrel carb) and 400 hp (298 kW) (with optional dual-four barrel carbs) at 6800-7000 rpm. The Z/28 also came with upgraded suspension, racing stripes on the hood and trunk lid, '302' front fender emblems on the early cars, and 'Z/28' emblems in late 68 & 69. It was also possible to combine the Z/28 package with the RS package.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
    Only 602 Z/28s were sold in 1967, along with approximately 100 Indianapolis Pace Car replicas.[3] The 1967 and 1968 Z/28s did not have the cowl induction hood, optional on the 1969 Z/28s. The 1967 Z28 received air from an open element air cleaner or from an optional cowl plenum duct attached to the side of the air cleaner that ran to the firewall and got air from the cowl vents. 15-inch rally wheels, were included with Z/28s had while all other 1967-9 Camaros had 14-inch wheels.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots


   The origin of the Z/28 nameplate came from the RPO codes - RPO Z27 was for the Super Sport package, and RPO Z28, at the time, was the code for a Special Performance Package.


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots


The Camaro's standard drivetrain was a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) and backed by a Saginaw three-speed manual transmission. A four-speed manual was also available. The two-speed "Powerglide" automatic transmission was a popular option in 1967 and 1968 until the three-speed "Turbo Hydra-Matic 350" replaced it starting in 1969. The larger Turbo 400 three-speed was an option on L35 SS396 cars.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

Thursday, December 30, 2010

Slot-It Alfa Romeo "Botched Job" My Attempts At Painting a "white" Model Racer

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots


Here are beautiful samples of the Alfa Romeo Brands Hatch described below.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots



Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
Alfa Romeo 33/3
#54 1st 1000 Km Brands Hatch 1971
Drivers: H.Pescarolo - A.De Adamich

The Alfa Romeo Tipo 33 Sports Prototype was designed in the mid-1960s to race in the World Sports Car Championship.  It succeeded and won the Manufacturers' Championship in 1975, and again in 1977.  Designed by Carlo Chiti, a famous Italian engineer, the several variants of the car were raced by the Alfa factory and by many privateers as well.  In 1971 it won three World Championship races: Brands Hatch, Watkins Glen, and Targa Florio.

The T33/3 cars featured a monocoque chassis, panelled in aluminium and magnesium, a V8 2994 cc. engine, and a 6 or 5 speed sequential gearbox.  Top speed reached 330 km/h.

Car n.54 is the winner of the 1000 Km of Brands Hatch in 1971.

Below is the Enzo's Garage painted Slot.It 1971 Alfa Romeo "Botched Job" painted from the 'white-kit', in August 2010!

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
 Notice the fine detail and elegantly executed edge lines of the Botch Job....

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
 The view from the front is exhibits the exceptional detailed painted front end.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

The decision to use acrylics was a smart decision, as is plain to see!


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

I will never, ever paint another model racer, again!   This should be left to PRO'S or those who are patient and extremely talented. 

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

I believe these 'un-painted kits' offered by industry is a well executed marketing ploy, since, in my case, (and in my brother's case), we bought the kits to race and the original model racers to find their royal place on the royal shelf, as Queens.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
Save $10.00?  Not a chance, since you spend $25.00 or so on painting material........ Stick to the originals, by 2, one for her Majesties collection!

The Alfa on the Left was the original 'Botched Job', the Mazda on the right was a more successful attempt since I used an airbrush.

FLY A-801 88127 ALFA ROMEO GIULIA GTV COSTA BRAVA

This is my first and trashed Fly Alfa.  (It's too bad because they are rising in value since Fly no longer produces this model),  I did a magnificent job of crashing the model.  All bumpers, mirrors and other accessories are missing or re-glued.
With modification, they are fast and handle well in a moderate course.   At the Al's Riverside Drive Raceway, (formerly, AL the Wop's Raceway), the car does pretty well considering that track's tortuous 4 "S" curves.  Below is a synopsis of the original Alfa GTV's.......

The history of the Alfa Romeo GTV

   The Alfa Romeo Alfetta is an Italian rear-wheel drive executive saloon car and fastback coupé produced from 1972 until 1987 by Alfa Romeo. It was popular due to its combination of a modest design with powerful engines, selling over 400,000 units until the end of its production run, but in the final years its sales were down due to Alfa Romeo's reliability problems that plagued the company through the late 1970s and early 1980s.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

  The Sedan had a body designed by Centro Stile Alfa Romeo, and the Alfetta GTV coupe (not to be confused with the more recent 1995 Alfa Romeo GTV, or the classic Giulia GTV), was designed by Giorgetto Giugiaro. The Alfetta introduced a new drivetrain layout to the marque. Clutch and transmission were housed at the rear of the car, together with the differential for a more balanced weight distribution, as used on the Alfetta 158/159 Grand Prix cars. The suspension relied on double wishbones and torsion bars at the front and a de Dion beam at the rear. The Alfetta was renewed in 1979 with a revised frontend, new wheel rims and new lights, as well as a diesel version.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
  It was available with two four-cylinder DOHC engines with two valves per cylinder and a turbodiesel engine supplied by VM Motori.[4] The 1.6 and 1.8 L base models had two double-barrel carburettors, while the 2.0 DOHC received fuel injection in 1979. The diesel initially had 2.0 L, but was increased to 2.4 L in 1982.

  The Alfetta was the base for the GTV, a fastback coupé version of the saloon, introduced in 1974 as Alfetta GT, initially available only with the 1.8 litre (1779 cc) version of the Alfa DOHC four. For 1976, with the final phasing out of the earlier 105 Series 1.3 and 1.6 litre coupes (GT 1300 Junior and GT 1600 Junior) and the 2.0 litre 105 series 2000 GTV, the Alfetta GT became a range, also available with the 1.6 litre (1570 cc) and 2.0 litre (1962 cc) versions of the same engine as the Alfetta GT 1.6, Alfetta GT 1.8 and Alfetta GTV 2000. The GTV designation was initially reserved for the 2.0 litre top version.

  In 1979, some minor revisions, including a revised engine with new camshaft profiles and a change to mechanical-and-vacuum ignition advance, saw the 2.0 litre redesignated the Alfetta GTV 2000L. Autodelta also produced a limited edition turbocharged model, named Turbodelta, for FIA Group 4 homologation. This version used a KKK turbo which pushed power up to 175 PS (129 kW). The car also received a modified suspension layout. This was the first Italian production car with a turbocharger.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
   The styling of the GTV, while distinctive, can be seen to share many design features derived from the Montreal supercar, as translated down to a simpler and thus more marketable vehicle. Examples of this are the bonnet line, which while briefer, still has 'scallops' for the headlights, and the tail light clusters which resemble those of the Montreal. The door shape is similar, and in a sharing of parts, both vehicles employ the same door handles.

  In 1981, the GTV received a restyling, with grey plastic bumpers and all matt-black trim replacing bright stainless steel, the 1.6 litre and 1.8 litre versions were discontinued and the Alfetta 2000 GTV became the base coupé model as the Alfa GTV 2.0. The Alfetta name was dropped, but the two-litre coupé retained its type designation of 11636 for left hand drive and 11637 for right hand drive. 15 inch alloy wheels were now standard, as opposed to the earlier cars' 14 inch pressed steel or optional 14 inch alloy.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
   Later in the same year, the GTV-6, a version of the GTV with the SOHC V6 2.5 L engine from the Alfa 6 luxury sedan, was released. As a result the hood received a bulge to clear the top of the intake and became its most pronounced feature. With Bosch fuel injection instead of the six downdraught Dell'Orto carburettors in the early Alfa 6 installation, the V6 was much easier to start and retained its state of tune much better. The V6 received rave reviews from the motoring press, which had previously lambasted the same engine in the Alfa 6 because of the carburettor problems. It found its true home in the GTV-6 where it could stretch its legs better than in the less sporting Alfa 6 sedan, including winning the European Touring Car Championship an unprecedented four years in succession (1982�85), the British Touring Car Championship in 1983 at the hands of Andy Rouse, as well as many other racing and rallying competitions. The fuel injection installation eventually made it into the second series of the Alfa 6 as well. The GTV went through a number of revisions, including a new gear ratios and an updated interior in 1984.


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
    For the U.S. market two limited production GTV-6 models stand out. The Balocco (named after the famous Balocco test track in Italy) in 1982 with a production run of only 350 cars. The Balocco was available only in red with sunroof and black interior, leather wrapped steering wheel and red piping on the seats. There were also two green Quadrifoglio badges fixed on the rear quarter trim pieces above a badge with the "Balocco SE" designation. A plaque inset in the glove box door designated the number of the car out of the series of 350 (XXX of 350) And the GTV-6 2.5 Maratona, of which only 150 were built. The Maratona model included a more aggressive aerodynamic trim package, lightweight Speedline wheels, clear engine view port, sunroof, wood steering wheel and shift knob, rear louvers and Carello fog lamps. All 150 cars were available only painted Silver and with a black leather interior; and came with "Maratona" badging on the rear decklid, front fenders and glove box door. (The most notable feature of the Maratona, its aerodynamic kit, was also available as a dealer-installed option on other GTV-6 models.)


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots
   Callaway Cars, famous for their modified Camaro, Impala SS and Corvette offerings modified between thirty and thirty-six (depending on whether one "counts" those cars with Callaway components which were not assembled by Callaway but, instead, had those components fitted by Alfa Romeo dealers) twin-turbocharged GTV-6s between 1983 and 1986, of which the first five (the cars produced between 1983 and 1985; these were sold and titled as 1985 model year cars, save for the first prototype which was sold and titled as a 1984) were prototypes. Callaway "production models" were otherwise listed as from the 1986 model year. In addition to numerous small component upgrades, the Callaway GTV-6s included a somewhat revised suspension (most notably eschewing the metric Michelin TRX wheel/tire combination then standard on the GTV-6 in favor of Pirelli or Goodyear tires on conventionally-sized BBS, Speedline or OZ lightweight alloys), improved brakes and, most importantly, a twin-turbocharger system, boosting performance to exotic levels. A different twin turbo GTV was also built briefly for the Australian market.

  Racing versions of the Alfetta GT and GTV were built by Autodelta, initially with the normally aspirated engine from the earlier GTAm racer based on the 105 series coupe, for homologation under FIA Group 2. In this form they were rallied with moderate success in 1975, winning the Elba and Costa Brava rallies overall, as well as winning the Group 2 category in the World Rally Championship's Corsican event. The next year Autodelta shifted its focus to circuit racing the Alfettas, which won the under 2.5-litre Group 2 division of the European Touring Car Championship, scoring a remarkable second place overall at the 24 hour race at Spa-Francorchamps, as well as an overall win in the ETC race at Vallelunga. Despite such results, Autodelta's efforts with the Group 2 Alfetta were desultory, and ended prematurely. At a single rally at the end of the 1975 season, Autodelta also rallied an Alfetta GTV with a 3.0 litre V8 engine, derived from the 2.6 litre V8 of the Alfa Romeo Montreal coupé and sharing the same mechanical fuel injection by SPICA. It had been suggested to produce 400 roadgoing versions of this model for homologation but this plan was abandoned as well.

Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

Friday, October 8, 2010

Scalextric Eagle Gurney-Weslake #5

Scalextric Eagle Gurney Weslake F1 driven by Dan Gurney in 1968. Gurney's Eagle Gurney Weslake Scalextric model F1 slot car is super fast with 18K Inline FF motor, adjustable magnatraction, self centering easy change guide, displayed in a clear crystal case with inner sleeve complete and spare guides for your collection. 


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots




Scalextric 1/32 slot cars are superbly detailed and manufactured to a very high quality, they can be easily converted to digital with a conversion chip from dealer's digital sections. However this Eagle Gurney Weslake is not suitable for digital conversion but don't forget your tune up accessories from the sports + range. 


Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots




Scalextric slot cars offer great track performance all with different performance characteristics giving unlimited usage and are highly collectable. Scalextric 1/32 slot cars, Scalextric Start & Super-Slot slot cars as Scalextric is branded in Spain are compatible with all other 1/32 manufacturers analogue slot car track systems as well as their Digital tracks where limitations permit such as Ninco, SCX and Carrera much like Slot.It, Spirit, Cartrix, Avant Slot, NSR, Sloter, MB Slot, MRRC, Fly-Slot, Racer and Revell slot cars are, enabling you to enjoy all of the slot cars on one slot car track system of your choice. Scalextrics C3102, Eagle Gurney Weslake- Dan Gurney. 



Boxed Set  
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

Vintage Scalextric Tri-Ang

Tri-ang - Made in England - COOPER MM/C.66
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots

The 60's
In the beginning of 1960 the metal cars were replaced by plastic models. In 1963 the track type was changed from rubber to plastic. The plastic track with a new attachment system is still in use today.
Scalextric offered a wide range of models, such as Maserati 250F GP, Ferrari GP, Bentley 4.5 and Aston Martin GT. Not only cars were available in 1963, but also motor bikes with sidecars and Go-karts.
Slot car racing became very popular during the sixties. Tri-ang Toys opened factories in France, Spain, Australia and New Zealand. Scalextric was not the only company that offered 1/32 scale models. About six other slot car companies were active at that time.